beams not showing in 3D view

graphic representation in 3 dimensions
Post Reply
BSOR
Posts: 5
Joined: 05 December 2017, 11:39

beams not showing in 3D view

Post by BSOR »

Help requested please. The beams from my moving heads (JB systems Sirius) do not show up in my 3D screen. All beams from my other lights are visible (washes and floor floods etc) The 3D render showsthe moving heads moving as per the scene but there is no light beam shown. What am I doing wrong? Thanks in anticipation
support
Administrateur
Posts: 10975
Joined: 07 December 2009, 16:32

Re: beams not showing in 3D view

Post by support »

Please post the personality file.
(Tab "Editor > Fixtures" > double clik on the fixture > click on "Export" in the window "Edit Fixture")
We will check it.
The Lighting Controller
BSOR
Posts: 5
Joined: 05 December 2017, 11:39

Re: beams not showing in 3D view

Post by BSOR »

Atomic 4DJ.txt
(497 Bytes) Downloaded 767 times
JB Systems Sirius.txt
(483 Bytes) Downloaded 784 times
Here are the personality files from my two different moving heads - neither display beams in 3D view. Thanks in anticipation
support
Administrateur
Posts: 10975
Joined: 07 December 2009, 16:32

Re: beams not showing in 3D view

Post by support »

The channel "shutter" must have at least one level with the name "open".
The channel "color" must have at least one level with the name "white".
The attached revised profiles show a white beam.

If you make the profiles requirements here: https://forum.thelightingcontroller.com ... m.php?f=25
following this: https://forum.thelightingcontroller.com ... f=3&t=2453
we will do the complete personality files for you.
Attachments
JB Systems Sirius.txt
(508 Bytes) Downloaded 744 times
Atomic 4DJ.txt
(522 Bytes) Downloaded 768 times
The Lighting Controller
Post Reply

Return to “3DView”