Heyo,
so i am running 4 classic ADJ Par 56 Cans via an optima matrix DMX pro 4 chan Dimmer (2 circuits per dimmer). In essence i currently run 4 Par 56 cans in Chans 1,2,3,4... yet i can run two per chan.
Now the dimmer is set up via a custom "fixture"... with 4 channels. How do i get those 4 par cans to show up individually via 3D.
how to show up parcan [fixed]
Re: Par Cans in live
Add 4 seperate "par cans" and then these will show up. you just have 4 fixtures in place of a 4 channel dimmer box.
Think of setting up your light show with the fixtures rather than how they are controlled. For example - if you have 24 par cans run off 4, 6 channel dimmer boxes - put 24 par cans in your show and as long as they are simply a dimmer there will be no problem talking to the dimmer that is controlling the par cans.
Think of setting up your light show with the fixtures rather than how they are controlled. For example - if you have 24 par cans run off 4, 6 channel dimmer boxes - put 24 par cans in your show and as long as they are simply a dimmer there will be no problem talking to the dimmer that is controlling the par cans.