Page 1 of 1
Need help for dip switch settings for acme dynamo [moved]
Posted: 22 May 2011, 10:58
by vinnymac
hi i am new to this and am trying to set my 4 acme dynamo scaners up to work with the usb cable sweetlight 100, can somebody tell me what dip switch settings the scaners are supposed to be set to many thanks
Re: Need help for dip switch settings for acme dynamo [moved]
Posted: 23 May 2011, 13:53
by event lighting
Hi Vinnymac,
The manual for your lights can be found at:
http://prolight.co.uk/images/media/DYNA ... 6b44efdc1b
These scanners use 4 channels of dmx so to be able to operate them all on a seperate address you will need to set the 1st one to 1, the 2nd unit to 5, 3rd unit to 9, 4th unit to 13.
Dip switch settings are:
1 = Dip 1 on
5 = Dip 1+3 on
9 = Dip 1+4 on
13 = Dip 1+3+4 on
Regards
Jon
Event Lighting
Re: Need help for dip switch settings for acme dynamo [moved]
Posted: 24 May 2011, 12:29
by vinnymac
Thanks Jon, I will try that tonight is it easy enough to use the sweetlight 100 software making diffrent sences etc