Page 1 of 1
Chauvet LEDrain 56C keeps flashing in 3DView ! [fixed]
Posted: 27 June 2010, 16:19
by mariconson
When I add the fixture Chauvet LEDrain 56C (7 Channels) they keep flashing in the 3d view when the dimmer is on. Why is this happening?
Im using ShowXpress 6.22 Beta 1 on a Mac. I dont have the box or the light plugged in.
Hope someone can help me.
Re: Chauvet LEDrain 56C -3Channels or 7Channels??
Posted: 27 June 2010, 18:25
by directsound
It happend to me also it is a setting issue and the fix is somewhere here in the forums page. It is a easy fix and has something to do with setting up your strobe or dimmer chanel right. Im sure you will get an answer or if you look hard enough hear or in the 5.o foroum you will find it
MM
Re: Chauvet LEDrain 56C -3Channels or 7Channels??
Posted: 27 June 2010, 22:11
by mariconson
Thanks Mike, I did a search and found it.
I had to:
- set the channel "strobe_speed" must be changed by channel "shutter".
- and it must contain the 2 following levels: "open" and "strobe".
Re: Chauvet LEDrain 56C -3Channels or 7Channels??
Posted: 28 June 2010, 01:19
by directsound
Great its been a long time for that one
MM