Page 2 of 2
Re: pixel effects with the chauvet freedom stick x4 set?
Posted: 13 October 2024, 18:02
by support
This is not a problem.
You just have to set the correct addresses in Pixels.
In Pixels, if the first fixture has the DMX address 148, the next one has to have the DMX address 148 + 50 = 198.
Re: pixel effects with the chauvet freedom stick x4 set?
Posted: 14 October 2024, 17:27
by stef
Hi,
See the pictures . I think i did it correct.
I can't find why the pixel are only work with strobe when i turn pixel on
Re: pixel effects with the chauvet freedom stick x4 set?
Posted: 15 October 2024, 07:58
by support
Please check that the channel #49 "shutter" is not forced to the level "strobe".
section "Gedeelde kanalen" > button "Bewerken".
You can double check that in the window "DMX bargraph".
Re: pixel effects with the chauvet freedom stick x4 set?
Posted: 15 October 2024, 17:45
by stef
Hi,
I think it use only RGB channels like the screenshot.
Shutter is 100% and Dimmer also 100% . I not use it by live control or editor. Only pixel control
Re: pixel effects with the chauvet freedom stick x4 set?
Posted: 15 October 2024, 21:06
by support
Shutter is 100% and Dimmer also 100%
shutter 100% gives fast strobe
Re: pixel effects with the chauvet freedom stick x4 set?
Posted: 16 October 2024, 04:17
by stef
Oké! Thanks !
I have to turn off the fader. I though it was a slide fader for rgb channel .