4inl 7x4w Thin Par
USER MANUAL

Thank you for purchasing this Led Par light, for the sake of the safety and regular operation of this product,
please read the manual carefully before you using and operating it.

Display Panel
Press MENU to enter the main menu,
to press up or down to select sub-menu,
then press ENTER to confirm the mode:

MENU   UP DOWN ENTER


LED Display
Display	mode	Description
d001	D512	4CH mode
A001	A512	8CH mode
FF01	FF99	RGB color gradual change
CC01	CC99	RGB Color jump
r000	r255	Red light brightness
G000	G255	Green light brightness
b000	b255	Blue light brightness
U000	W255	white light brightness
dEoo		Demo mode
LEdr		Red show mode
LEdG		Green show mode
LEdb		Blue show mode
LEdu		Amber show mode
LErG		Red & Green show mode
LErb		Red & Blue show mode
LEGb		Green & Blue show mode
LEru		Red & Amber show mode
LEGu		Green & Amber show mode
LEbu		Blue & Amber show mode
LrGb		Red,Green &Blue show mode
LrGu		Red, Green & Amber show mode
LGbu		Green, Blue & Amber show mode
Lrbu		Red, Blue & Amber show mode
SoUd		Sound-activated
SLAu		Master-Slave

Attachments:
While receiving the product, please take carefully and check whether it was been destroyed
on conveyance, after that, check the following parts.

I. 1x Light unit
2. 1x User's manual
3. lx remote control
4. 1x Bracket
5. 1x AC plug

DMX512 Control Setting
When use the light connect with a DMX controller, there two DMX modes for choice,
4 channel mode and 8 channel mode as fellows:

4 Channel mode
Channel	Value	Description

CH1	0	red off
	1 —255	from dark to bright

CH2	0	green off
	1-255	from dark to bright

CH3	0	blue
	1-255	from dark to bright

CH4	0	Amber
	1-255	from dark to bright

8 Channel mode
Channel	Value	Description

CH1	0-255	dimming

CH2	0	red off
	1-255	Red from dark to bright

CH3	0	green off

	1-255	Green from dark to bright

CH4	0	blue off
	1-255	Blue from dark to bright

CH5	0	Amber off
	1-255	Amber from dark to bright

CH6	1-255	Flash from fast to slow

CH7	1-63	Color gradual change:Channel 8 control speed
	64-127	pulse change:Channel 8 control speed
	128-191	Color jump:Channel 8 control speed
	192-255	Sound-activated open

CH8	0-255	Speed(work with CH7)

Master-slave set
Two or more than two identical lamps connected with 3-pin signal cable,
set any of a host as demo program, gradual or jump,other lamp receiving address set as SLAu.

Remote control setting
|	Enter
Mader
mode Mash
ADD-  DMA ADD+
R
B
W
G

Technical Parameter
Power : turn on or turn off the light
Enter memory the current state,puwer on to restart this status Auto : implementation of the Internal procedures under DEMO Music: Sound-activated
Mode: to choose different work mode
/work with Add+/-to choose different color combination Flash: Color gradual change
Motor: No Use
Add-: working mode of decrease switch
DMX: adjust DMX mode
Add+: working mode of increase switch
R: adjust red brightness B: adjust blue brightness G: adjust green brightness W: adjust Amber brightness

Item	4in1 10W Thin Par LED
Spec	
LED Light	Red/Green/Blue/Amber
LED Power	4V1P7PCS
Net Weight	1.5kg
System Port	DMX512 input and output port
Control Mode	Sound Active, Built-in program,master-slave ,Remote control
Demo Effect	255 grade high brightness leve1,0-100% linear dimming,camera video real no flicker,color more gorgeous rich.
Power Supply	110-240v AC 50/60HZ
Power	30W
Consumption	
Product	8.7"X4.7"X8.7"
dimension	
DMX channel	4/13CH
Additional safety information
Please make sure to turn off the light before installation and maintenance.
Please make sure when operating the light you have good ventilation.
'This light is designed for indoor use. Please keep it dry whenever using it. Install and maintenance should be done by a technician.
•Don't use other voltage that not complies with the instruction showed.
•Don't stare at the lighting source; it may damage your eyes.
•Don't operate unless there is stable voltage.
•Don't use it in a moist environment.
-4-